baltur BT 40 DSN 4T Manual De Instrucciones página 7

Quemadores de aceite combustible de dos etapas
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FLOW RATE
THERMAL POWER
FUEL VISCOSITY
FAN MOTOR
SEPARATE PUMP MOTOR
IGNITION TRANSFORMER
POWER SUPPLY VOLTAGE
ELECTRICAL ABSORPTION
PRE-HEATER HEATING ELEMENT
SUPPLIED MATERIAL
BURNER CONNECTION FLANGE
ELASTIC ROSETTE
INSULATING SEAL
STUD BOLTS
HEXAGON NUTS
PLAIN WASHERS
HOSES
FILTER
TECHNICAL FUNCTIONAL FEATURES
Operation at two power stages (high/low flame).
Possibility to obtain great combustion values through combustion
air and combustion head regulation.
Easier maintenance thanks to the possibility to remove the
atomization unit without separating the burner from the boiler.
First and second stage rate regulation by means of electric
servomotor with pause damper to prevent any heat dispersion
from fluing.
Fuel oil with a viscosity of up to 20°E at 50°C may be used by
adding to the burner a kit including heating elements for pump,
atomizing unit and 1st and 2nd stage solenoid valve.
BT 180
DSN 4T
MIN Kg/h
65
MAX Kg/h
180
725
MIN kW
2009
MAX kW
light oil
heavy oil
50Hz
3.00 kW /
2885 r.p.m.
60 Hz
3.50 kW /
3350 r.p.m.
- -
- -
3 N ~ 400V ± 10% 50/60 Hz
THREE
PHASE
3 N ~ 230V ± 10% 50/60 Hz
50 Hz
18,5 kW
60 Hz
19,0 kW
15.0 kW
BT 180
DSN 4T
- -
No. 4 - M12
No. 4 - M12
No. 4 - Ø12
No.1-3/4" / No.1-1"¼
If using a fuel oil with low suplhur content, add to the burner the
kit (sold separately) including: specific line filter, flexible steel
hoses and heating elements for the pump, atomizing unit and
1st and 2nd stage solenoid valve.
Sliding generator connection flange to adapt the head protrusion
to the various types of heat generators.
Atomizing unit with nozzle closing spring.
Flame presence control with photocell.
Electric system with protection class IP40.
Burner may be integrated with a steam-operated supplementary
fuel oil pre-heater which allows fuel oil to be heated with steam
from the boiler during regular operation, saving electricity (only
from BT 120 to BT 350).
5 / 40
0006081310_201211
BT 250
BT 300
DSN 4T
DSN 4T
90
110
280
325
937
1220
3170
3460
7°E - 50°C
20°E - 50°C
7.50 kW / 2900 r.p.m.
9 kW / 3480 r.p.m.
- -
- -
1,3 kW
1,3 kW
14 kV - 30 mA
26,0 kW
33,5 kW
28,8 kW
36,3 kW
18.0 kW
25.5 kW
BT 250
BT 300
DSN 4T
DSN 4T
No. 2
- -
- -
No. 1
No. 4 - M20
No. 4 - M20
No. 4 - Ø20
No.2-1"¼
1"¼
BT 350
DSN 4T
115
350
1284
3907
9.00 kW /
2900 r.p.m.
11.00 kW /
3480 r.p.m.
- -
1,3 kW
40,0 kW
41,3 kW
28.5 kW
BT 350
DSN 4T
No. 1

Publicidad

Tabla de contenido
loading

Tabla de contenido