Kemper CleanAirTower Instrucciones De Servicio página 60

• Check that lifting gear is fixed firmly at the attachment points and on the crane hook.
• Attach the transport ropes to the crane hook in such a way that, when taut, they do not
touch the machine parts lying above the attachment points.
• Use a loading harness if necessary.
• Adjust the lengths of the suspension cables so that the components of the product
hang horizontally. Hook the suspension cables with shackles into all eyebolts/crane
lugs. The angle of the suspension cables to the vertical must not exceed 30° and the
eyebolts/crane lugs must not be loaded laterally. The eyebolts/crane lugs must not be
deformed and should not be subsequently colour-coded (especially red) due to the risk
of confusion.
• When choosing the shackle, ensure that each individual shackle has sufficient load
capacity.
1502828-01
Fig. 22: Information on lifting procedure
- 60 -
EN