Kemper CleanAirTower Instrucciones De Servicio página 62

Pallet A
Pos. Designation
1 Suction component
3 Fan component
4 Start-up protection
6 Clamping ring
8 Pallet
NOTE
A suitable power and compressed air supply must be available at the installation
location.
1. Remove the packaging film, the tensioning straps and wooden pallets from the
individual packaging units.
Fig. 24: Lifting the extraction component from the fan component
2. Loosen the clamping ring (Pos. 6) and lift the extraction component (Pos. 1) from the
fan component (Pos. 3) using a suitable lifting harness.
1502828-01
Pallet B
Pos.
2
5
6
7
8
Tab. 16: Positions on the product
- 62 -
Designation
Filter component
Transport adapter
Clamping ring
Transport brackets
Pallet
EN