Transport And Storage; Transport; Storage; Transport Of The Product With A Crane - Kemper CleanAirTower Instrucciones De Servicio

4 Transport and Storage

4.1 Transport

DANGER
Life-threatening crushing possible when loading and transporting the product!
Improper lifting and transporting may cause the pallet (if present) to tilt and fall!
• Never stand under suspended loads.
If available, a lift truck or forklift is best suited for transporting the pallet with the product.
The weight of the product can be found on the name plate.

4.2 Storage

The product should be stored in its original packaging
at an ambient temperature of 20 °C to +50 °C in a dry and clean place. The packaging must
not be loaded by other objects.
The storage duration is not critical for all products.

4.3 Transport of the product with a crane

DANGER
• Potentially fatal crushing injuries when lifting and transporting the individual
components of the product! Incorrect installation can cause components to fall
down.
• Incorrect lifting and transport can cause the components of the product to tip over
and fall down.
• The components of the product may only be lifted and transported with suitable
lifting gear.
• Never stand under suspended loads or under improperly installed components.
• Lift and transport the individual components of the product with a single forklift
only. The permissible load of the forklift must not be exceeded.
• Use suitable standard-compliant climbing aids and ensure that you are standing
securely.
• Observe the applicable accident prevention and occupational safety regulations.
• Follow the instructions and regulations of the carrier.
The following safety instructions must be observed when transporting the product with a
crane:
1502828-01 - 59 -
EN