Reasonably Foreseeable Misuse; Markings And Signs On The Product; Residual Risk - Kemper CleanAirTower Instrucciones De Servicio

3.3 Reasonably foreseeable misuse

No reasonable, foreseeable misuse is possible that could lead to dangerous situations with
personal injury when working with the product whilst adhering to its intended use.
The operation of the product in industrial areas that do not comply with the requirements
for explosion protection is not permissible. Furthermore, the operation is prohibited for:
1. Processes that are not in the intended use list and in which the extracted air is:
• mixed with flying sparks, e.g. from grinding and welding processes;
• mixed with liquids and the resulting contamination of the air flow with vapours
containing aerosols and oils;
• mixed with highly flammable, combustible dusts and/or with substances that can form
explosive mixtures or atmospheres;
• mixed with other aggressive or abrasive dusts;
• mixed with organic, toxic substances/parts of substances;
2. Outdoor locations where the product is exposed to weather conditions – the product
must only be used in closed buildings.

3.4 Markings and signs on the product

Various markings and signs are affixed to the product. If these are damaged or removed,
please replace them immediately with new ones in the same location.
The operating company is obliged to post further notes and signs on the product and its
surrounding area if necessary.
Such notes and signs might be related, for example, to the requirement for wearing
personal protective equipment.

3.5 Residual Risk

Even when all safety rules are observed, when operating the product a residual risk
remains, as described below.
All persons working on and with the product must be aware of these residual risks and
follow the instructions that prevent these residual risks from causing accidents or
damages.
WARNING
Danger of serious injury to the lungs and respiratory tract – always wear respiratory
protection, Class FFP2 or higher.
1502828-01 - 57 -
EN