Maintenance - Kemper MiniFil Instrucciones De Uso

6 Maintenance

The instructions in this chapter are intended as minimum requirements. Depending
on the operating conditions, further instructions may be required to keep the MiniFil in
an optimal condition.
The maintenance and repair work described in this chapter must only be performed
by specially trained repair personnel of the operating company.
Any spare parts used must correspond to the technical requirements set by
KEMPER GmbH.
This is guaranteed if original spare parts are used.
Ensure the safe and environmentally sound disposal of working material and
replacement parts.
During maintenance work observe:
●
Section 2.4 Safety Instructions for Operators
●
Section 2.5 Safety Instructions for Maintenance and Fault Clearance
●
The safety notes on the individual jobs specifically mentioned in this Section.
- 56 -
Technical modifications and errors expected.
KEMPER MiniFil Operating manual - EN