Key To Symbols; Worn-Out Products - Sundstrom SR 500 Instrucciones De Uso

24. HD battery, 3.6 Ah
24. Battery charger SR 513
25. Belt SR 508
25. Rubber belt SR 504
25. Belt PVC
26. Leather belt SR 503
27. Harness SR 552
28. Fan unit SR 500, bare
29. Gasket to fan unit
30. Pre-filter holder SR 512
31. Pre-filter SR 221
32. Particle filter P3 R, SR 510
33. Filter adapter SR 511
34. Pre-filter holder SR 5153
35. Particle filter P3 R, SR 710
36. Gas filter A2, SR 518
37. Gas filter ABE1, SR 515
38. Gas filter A1BE2K1, SR 597
39. Combined filter A1BE2K1-Hg-P3 R,
SR 599
40. Splash cover SR 514
41. Plug kit

6.Key to symbols

Recycling symbol
See user instructions
Not with ordinary waste
CE approved by
INSPEC Certification Services Ltd.
Insulation class 2
Pressure and temperature compensated

7. Worn-out products

The fan unit contains a circuit board with electronic
components, a small proportion of which comprise toxic
substances. The battery contains no mercury, cadmium
or lead, and is therefore not regarded as environmentally
harmful waste. The plastic parts are marked with the
material code. For proper handling, collection and recy-
cling, worn-out fans should be handed in to a recycling
centre. Contact the local authorities for information on
the location of your nearest recycling centre.
Recycle in accordance with local regulations. Proper re-
cycling of the product contributes to efficient use of the
natural resources.
8. Approvals
T06-0101
R06-0103
• The SR 500 in combination with face shield SR 540 or
R06-0101
SR 570, welding shield SR 590 or SR 592, helmet
T06-0104
with visor SR 580, helmet with visor SR 580 with wel-
T06-0124
ding shield SR 584, hoods SR 520, SR 530, SR 561
T06-0103
or SR 562 is approved in accordance with EN 12941,
T06-0116
class TH3.
R06-0110
• The SR 500 in combination with full face mask
R06-0107
SR 200 or half mask SR 900 is approved in accor-
R06-0106
dance with EN 12942, class TM3.
H02-0312
H02-1312 • The SR 500 conforms to the requirements of
R06-0105 EN 61000-6-3 Emission and EN 61000-6-2 Immuni-
R01-0604
ty, which makes the fan conform to EMC Directive
H02-1512
2004/108/EC.
H02-7012
• The electronics ingress protection is approved in IP
H02-7112
classification IP67 in accordance with IEC/EN 60529.
H02-7212
The EC type approval certificate has been issued by
H02-7312
Notified Body No. 0194. For address, see back-cover.
T06-0114
R06-0703
Australian StandardsMark
The fan SR 500 is tested and certified to comply to
AS/NZS 1716:2012. The StandardsMark is issued
under licence by SAI Global Certification Services Pty
Limited Lic No.766 (ACN 108 716 669) ("SAI Global").
39