Tabla de contenido
Publicidad
ABB-Welcome
Use app to open door
Round pushbutton module with NFC can be used for opening doors. Programming is carried
out directly on the module or via a web browser (requires IP gateway 83342 -500). Additional
devices are not required for commissioning.
To the play store
(https://play.google.com/store/apps/details?id=com.abb.allegro3_nfcdooropener&hl=en )
1. Download and install the ABB door opener app from Google Play Store.
2. Turn on the NFC function of your device.
3. Enter setting mode of your round pushbutton module.
4. Start the app at your device.
5. Set up your device as new user.
6. Configure your personal settings.
|
— 41 —
Publicidad
Tabla de contenido
