Tabla de contenido
Publicidad
ABB-Welcome
5.6
Keypad outdoor station without display (camera + audio +
keypad)
5.6.1
Calling a resident by inputting physical address
In standby mode, a visitor can enter the physical
address corresponding to the residence to call
directly, from 001 to 250.
For a complex building, the visitor needs to press the
building number (01-60) plus physical address (001-
250) to make a call from a gate station.
5.6.2
Call guard unit
Press the button
5.6.3
System settings
Users can enter the system settings by following these steps. (In settings, press "#" to
confirm, press "*" to cancel. The default system password is 345678.)
1.
Set the device as an outdoor station or a gate station.
Outdoor station:
#* system password #
1 #
=>
1 #
Gate station:
#* system password #
1 #
=>
2 #
2.
Modify the "system password"
#* system password #
2 #
=>
Enter new password (6-8 bits) #
3.
Modify the "door open code"
#* system password #
3#
=>
Enter new door open code (3-8 bits) #
|
to make a call to a guard unit.
=>
=>
=>
=>
=>
Enter the password again #
=>
Enter the code again #
— 56 —
Publicidad
Tabla de contenido
