System Settings - ABB M25102 K Serie Manual Del Usuario E Instrucciones

ABB-Welcome
5.5.5

System settings

(In settings, press "#" to confirm and "*" to cancel. The default system password is
345678.)
1. Enter the system settings menu
#* system password #
Menu__________
Configurations-- ∧
Access Control
Contact
2. Configurations
(1) Set the device as an outdoor station or a gate station.
Outdoor station:
#* system password #
Configurations #
Device Type_____
Outdoor St. ● -- ∧
Gate Station
Gate station:
#* system password #
Configurations #
Device Type_____
Outdoor St.
●-
Gate Station
(2) Set the call mode: Make a call by a physical address or a logic code.
Set the call mode by Physical Address:
#* system password #
Configurations #
Call mode_______
Physical Add.●
Logic Add.:
|
∨
=>
=> Device Type #
∨
=>
=> Device Type #
∧
∨
=>
=> Call mode # =>
=> Outdoor St. # (Default)
=> Gate station #
Physical Address #
— 46 —