Transmit Measured Results To A Radio Receiver; Calculate And Print Out Bmi Automatically - Seca 954 Manual De Usuario

BMI
Under 18.5
Between 18.5 and
24.9
Between 25 and 30
(pre-obesity)
Over 30
Transmit measured
results to a radio
receiver
Calculate and print out
BMI automatically
The patient is underweight. There might be a tendency to
anorexia. It is advisable that the patient puts on weight to
improve well-being and performance. If in doubt, a medical
specialist should be consulted.
The patient's weight is normal.
The patient is slightly to moderately overweight and should
lose weight if already suffering from disease (e.g. diabetes,
high blood pressure, gout, disorders of the fat metabolism).
The patient urgently needs to lose weight as this is putting a
strain on the metabolism, circulation and skeleton. The rec-
ommendation is for careful adherence to a diet, plenty of
exercise and behavioural training. If in doubt, a medical spe-
cialist should be consulted.
If the scale is integrated into a
less network, it can send the measurement results to
receive-ready instruments (wireless printers, PC with
USB wireless adapter) with the touch of a button.
Press the Enter key (send/print).
– Press key briefly: Send measured results to
all receive-ready equipment
– Hold down: Print out measured result using
wireless printer
If you use these scales with a wireless printer and a
length measuring device from the
system, you can calculate and print out the BMI auto-
matically.
NOTE:
The prerequisite for this function is that the
equipment devices are logged into a wireless
group (see "seca 360° wireless Network" on
page 73).
1. Carry out weighing.
2. Briefly press the Enter key (send/print) on the
scales.
The measured value is sent to the wireless printer
but not printed out.
3. Measure the height.
Evaluation
seca 360° wireless
seca 360° wireless
English
wire-
Operation • 67