Maintenance; Technical Data - Seca 954 Manual De Usuario

Malfunction
Er:X:12
... is displayed?
Er:X:16
... is displayed?
... when the Enter key
(send/print) is pressed
Er:X:71
and
played?
... when the Enter key
(send/print) is pressed
Er:X:72
and
played?

10.MAINTENANCE

11.TECHNICAL DATA

Dimensions
• Depth
• Width
• Height
Weight
Temperature range
The scales have been switched on with too great
a load.
- Reduce load on scales
- Restart scales
Oscillation of the scales has occurred, preventing
determination of the zero point.
- Restart scales
Data transmission not possible, wireless module
is disabled.
is dis- - Activate wireless module (see "Activate
wireless module (SYS)" on page 75).
Data transmission not possible, no wireless group
set up.
is dis- - Set up wireless group (see "Set up wireless
group (Lrn)" on page 75).
Your seca scales leave the factory with an accuracy
greater than ±0.3%. To preserve this level of accuracy
the product must be set up carefully and serviced regu-
larly. We recommend having it serviced every 3 to 5
years depending on how often the scales are used.
Technical data for
Cause/Remedy
ATTENTION!
Incorrect measurement due to improper
maintenance
– Make sure that maintenance and repair are
only carried out by an authorised service
partner.
– You can find your local service partner at
www.seca.com or just send an e-mail to
service@seca.com.
seca 954
810 mm
565 mm
920 mm
approx. 25 kg
+10° C to +40° C
English
Maintenance • 81