Operate Scales In A Wireless Group (Menu); Activate Wireless Module (Sys); Set Up Wireless Group (Lrn) - Seca 954 Manual De Usuario

7.2 Operate scales in a wireless group (menu)

......
rF
......
Activate wireless
module (SYS)
Set up wireless group
All functions required to operate the device in a
seca wireless group can be found in the submenu "rF".
Information how to navigate in the menu can be found
onpage 69.
learn Group (ID)
• on
Autosend
• off
• on
System
• off
• HI
• MA
Autoprint
• HI_MA
• off
• Year
• Month
• Day
Time
• Hour
• Minute
The device is supplied with the wireless module dis-
abled. It has to be activated before you can set up a
wireless group.
1. Switch the device on.
2. Select the menu item "SYS" in the "rf" submenu.
3. Confirm the selection.
4. Select "on".
5. Confirm the selection.
You will leave the menu automatically.
To set up a wireless group proceed as follows:
(Lrn)
1. Switch the device on.
2. Call up the menu.
• Channel 1 (C1)
• Channel 2 (C2)
• Channel 3 (C3)
NOTE:
When the wireless module is activated, the
power consumption of the device will increase.
We recommend using a power supply unit
when operating the device in a wireless net-
work.
seca 360° wireless Network • 75
English
Stop Reg. Devices (M)