Channels; Detection Of Equipment Devices - Seca 954 Manual De Usuario

Channels

The devices communicate with each other within each
wireless group via three channels (C1, C2, C3). This
ensures reliable, troublefree data transmission.
When you set up a wireless group with the scales, the
device will suggest three channels guaranteeing opti-
mum data transmission. We recommend accepting the
channel numbers suggested.
C1
C2
C3
You can also select the channel numbers (0 - 99) man-
0
ually, for example if you want to set up more than one
wireless group.
The channels must be sufficiently far apart to ensure
troublefree data transmission. We recommend a spac-
ing of at least 30. Each channel number may only be
used for one channel.
Example of configuration; channel numbers when set-
ting up 3 wireless groups within one surgery:
• Wireless group 0: C1=_0, C2= 30, C3=60
• Wireless group 1: C1=10, C2=40, C3=70
• Wireless group 2: C1=20, C2=50, C3=80
Detection of equipment
If you wish to set up a wireless group with the scales,
they will search for other active devices from the
devices
system. The devices detected are
seca 360° wireless
shown as modules in the display on the scales (e.g.
MO 3). The meaning of the numbers is as follows:
• 1: Personal scales
• 2: Length measuring device
• 3: Wireless printer
• 4: PC with seca USB wireless module
• 7: Baby scales
• 5, 6 and 8-12: Reserved for system expansion
74 •