Switch Weight Unit (Unit); Restore Factory Settings (Reset) - Seca 954 Manual De Usuario

Switch weight unit
Restore factory settings
72 •
3. Select an attenuation level.
4. Confirm the selection.
You will leave the menu automatically.
With uncalibrated scales you can select the unit you
wish to use for displaying the weight.
(Unit)
1. Select the item "Unit" in the menu.
2. Confirm the selection.
The current selection is displayed.
Select the unit you wish to use for displaying the
weight:
3. Confirm the selection.
You will leave the menu automatically.
You can restore the factory settings for the following
(RESET) functions:
Autohold (Ahold)
Acoustic signal (Press)
Acoustic signal (Hold)
Attenuation (Fil)
Autoclear (Aclear)
Pre-Tare (Pt)
Height for body mass index
(BMI)
Weight unit
Wireless module (SYS)
Autosend (ASend)
Autoprint (APrt)
– 0: no attenuation
– 1: moderate attenuation
– 2: high attenuation
– kilos (kg)
– pounds (lbs)
– stones (sts)
Function
NOTE:
The wireless module is switched off when
restoring the factory settings. Data for existing
wireless groups remains in the memory. These
groups do not need to be set up again.
Factory setting
depending on
model
off
on
0
depending on
model
0 kg
170 cm
kg
off
off
off