Battery Discharge Indicator - Manutan A170148 Guía De Usuario

1.2.3. Battery discharge indicator

When the truck has been switched on via the key switch, the battery
charge status is displayed.
The colours of the LED represent the following conditions:
• When the battery is fully charged, the first LED lights up. As the
battery charge decreases, the LED lights go red and another bar
is illuminated.
• When the second to last LED flashes, this indicates that the
"reserve charge" is now being used (70% of electricity used).
• When the last two LEDs flash alternately, this indicates that the
battery has some voltage (80% of electricity used), but needs
charging.
The LEDs (1) represent battery residual capacity.
The LCD (2) displays the operating hours. The
LED (3) is a fault alarm lamp.
Battery discharge indicator (1)
When the truck has been switched on via the key
switch, the battery charge status is displayed. The
LED colours (1) represent the following conditions:
Component LED colour
Green 70–100%
Standard
battery resid- Orange 30–60%
ual capacity
Flashing Red 0-20%
Battery discharge at 70%, a flashing red light
gives a warning, indicating that the stored bat-
tery charge is low. Battery discharge at 80%:
Two flashing red lights give a warning, indicating
that the battery is empty. Lifting is now inhib-
ited. The battery must be charged.
Operating hours display (2)
Display range between 0.0 and 99,999.0 hours.
Travel and lifting are logged. This is a backlit
display.
Power-up test
On power-up the display indicates:
• The operating hours
• The charge status
The battery discharge indicator has a memory function. It stores the battery power level after the
power has been switched off. The next time the power is switched on, it will display the previously
stored power level. If you want to reset the battery discharge indicator, please turn the key to the
on position after the battery has been fully charged.
Low voltage protection
This vehicle has a low-voltage protection function.
When the battery voltage is low, the vehicle will only be able to be driven at slow speeds. This means
that the battery now needs to be charged.
1.3. Identification points and data plates
Item Description
1 Truck data plate
2 "No riding" warning
3 Direction decal on control handle
A170148
A170149
Value
A170148
4 "Charge LED Mode" decal
5 "J FINE" decal
6 Knob decal
7 Puller decal
Item Description
1 Direction decal on control handle
2 Truck data plate
1.3.1. Truck data plate
Item Description
1 Manufacturer
2 Serial no.
3 Type
4 Rated capacity (kg)
Please quote the truck serial number (2) for any queries regarding the truck or when ordering
spare parts.
Model number example
A170149
3 Warning decal
4 Key switch decal
5 Logo decal
Item Description
5 Fork width (mm)
6 Fork length (mm)
7 Nominal battery capacity (Ah)
8 Weight including battery (kg)
1. Electric pallet truck
2. Capacity: 15=1,500 kg
3. Series label