Standard Accessories; Optional Accessories (Sold Separately) - Hitachi Koki C 6 Instrucciones De Manejo

English
PRECAUTIONS ON USING CIRCULAR SAW
1. Proceed with cutting operation when full speed has been
reached.
2. Never use the circular saw with its lower guard fi xed
open.
3. Ascertain that lower guard moves smoothly.
4. Never lay down the circular saw while the saw blade is
revolving.
5. Turn OFF the switch immediately when a fault occurs.
SPECIFICATIONS
Model
Voltage*
Power Input*
Max. Cutting Depth
Saw Blade: external diam.
thickness
internal diam.
No-load Speed
Weight (without cord)
*Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

(1) Combination Saw Blade (Monted to the tool) ................1
(2) Box Wrench ..................................................................1
(3) Guide .... .......................................................................1
Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (sold separately)

Combination Saw Blade
5
(110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)
1. Side Handle Set (for only C7)
1 Side Handle ..................................................................1
2 Plate ..........................................................................1
3 Spring Lock Washer (for M10) ......................................1
4 M10 Hexagon Cap Nut .................................................1
⊕
5 M512 Hd. Machine Screw .....................................2
(w/washer)
2. Combination Saw Blade (for only C7)
Application: Cutting various types of wood
Size:
185 mm external diam. 1.25 mm thickness
6. Never operate circular saw with its saw blade turned
upward.
7. Cutting glass fi ber is not recommended.
8. Do not use the saw blade of which the diameter at the
end of the teeth is less than 134 mm (C6) or 162 mm
(C7).
9. Always keep the saw blade sharp.
10. Ascertain that the workpiece is free of foreign matter
such as nails.
11. Exercise care to position the circular saw at a safe, stable
spot when sawing.
C6
670 W
55 mm
160 mm
1.05 mm
19 mm
4700 / min
3.1 kg
C7
1050 W
65 mm
185 mm
1.25 mm
19 mm
3.9 kg
(Attached condition)