Ki Mobility Ethos Manual De Instrucciones página 26

V. SET UP & USE OF YOUR WHEELCHAIR
N. Changing Elastomers (Continued)
4. Reinstall seat frame clamp with bolt, two washers, insert and nut using a 4mm Allen wrench
and a 10mm wrench. Install bolt back into the seat frame clamp top and leave loose so seat
frame can still be installed. Repeat on other replaced elastomers. See Fig. 21.
Fig. 21
5. Set seat frame assembly onto the seat frame clamps, adjust to the desired seat depth and
secure in place by tightening the four seat frame clamp bolts (Fig .22:A) with a 4mm Allen
wrench. Ensure detents on clamps align with the indents on the frame as you tighten.
NOTE:
Ensure seat frame is correctly aligned and secured before user is seated.
Fig. 22
A
A
25
A
A