Assembly - Westinghouse Annovi Reverberi WP2700 Manual Del Propietário

ASSEMBLY

Before assembling the pressure
washer, review Safety on page 7
and the following safety messages.
CAUTION
Never lift the pressure washer without
assistance. The pressure washer is
heavy and lifting without assistance
could result in personal injury.
Never use the handles as a lifting point
to support the entire weight of the
pressure washer. Only use the handles
to move the pressure washer by lifting
the handles and using the wheels to
move the pressure washer.
Use caution when collapsing the
handles. Hands and fi ngers could get
caught and pinched.
NOTICE
Assembling the pressure washer will require tipping
the unit. Make sure all engine oil and fuel are drained
from the unit prior to assembling.
Once assembled, the wheels are not intended for
on-road use. The wheels are designed for use on this
pressure washer only.
Never tip the pressure washer after it has been fully
assembled and fi lled with oil and fuel.
1. Place pressure washer on a fl at surface.
ASSEMBLY
2. Push the lock pin in and raise the handle (see
Figure 5).
Figure 5 – Raising Handle
3. Be sure the handle is locked in position with the pin
protruding through handle hinge (see Figure 6).
Figure 6 – Raising Handle
13