Westinghouse Annovi Reverberi WP2700 Manual Del Propietário página 15

9. Install the spray gun bracket using the two spray
gun bracket nuts (M6). Tighten the nuts securely
(see Figure 11).
2
1
Figure 11 – Installing Spray Gun Bracket and Hose
Bracket
1 - Spray Gun
Bracket
2 - Spray Gun
Bracket Nuts
(M6)
10. Install the hose bracket using the two hose bracket
nuts (M6). Tighten the nuts securely (see Figure
11).
11. Connect the wand to the spray gun and turn the
fi tting counterclockwise to tighten (see Figure 12).
Do not overtighten. The fi tting only needs to be
hand-tight.
Figure 12 – Connecting Spray Wand
1 - Fitting
4
3
3 - Hose Bracket
4 - Hose Bracket
Nuts (M6)
1 2
2 - Spray Wand
ASSEMBLY
12. Inspect the O-rings on both sides of the high-
pressure hose. Moisten the O-rings with water (see
Figure 13).
Figure 13 – High-Pressure Hose O-Rings
13. Connect the high-pressure hose to the pump and
tighten the hose fi tting (see Figure 14 and Figure
15). Do not overtighten. The fi tting only needs to be
hand-tight.
1
2
Figure 14 – Installing High-Pressure Hose – WP2700
1 - Soap Hose 2 - Hose Fitting
15