Spark Plug Maintenance - Westinghouse Annovi Reverberi WP2700 Manual Del Propietário

7. Wash the air fi lter foam element by submerging
the element in a solution of household detergent
soap and warm water. Slowly squeeze the foam to
thoroughly clean.
NOTICE
NEVER twist or tear the foam air fi lter element
during cleaning or drying. Only apply slow but fi rm
squeezing action.
8. Rinse in clean water by submerging the air fi lter
foam element in fresh water and applying a slow
squeezing action.
NOTICE
Never dispose of soap cleaning solution used to
clean the air fi lter by dumping the solution into
a sewer, on the ground, or into groundwater or
waterways. Always be environmentally responsible.
Follow the guidelines of the EPA or other
governmental agencies for proper disposal of
hazardous materials. Consult local authorities or
reclamation facility.
9. Dispose of used soap cleaning solution properly.
10. Dry the air fi lter foam element by again applying a
slow fi rm squeezing action.
11. If necessary, replace the air fi lter paper element.
12. Return both air fi lter components to their position.
13. Return the air cleaner cover and secure it with the
wing nut.
MAINTENANCE

SPARK PLUG MAINTENANCE

The spark plug must be replaced after every 100 hours
of use or every year.
1. Stop the pressure washer and let it cool for several
minutes if running.
2. Move the pressure washer to a fl at, level surface.
3. Remove the spark plug boot by fi rmly pulling the
plastic spark plug boot handle directly away from
the engine (see Figure 47 and Figure 48).
Figure 47 – Spark Plug Location – WP2700
Figure 48 – Spark Plug Location – WP3000
4. Clean area around the spark plug.
35