Avintage DIVA Serie Manual De Utilización página 71

Sliding rails installation (RAILV3)
1- Prepare your sliding rails in the right
direction for installation:
- The part with stems, facing upwards,
has to slide outwards the wine cellar
- The other part, with stems facing
downwards of which is biased, has to
be inserted into holes provided for that
purpose in the lateral walls of the wine
cellar
Please note that biased stems facing
downwards (1) have to be positioned in the
holes at the back of the appliance. They are
biased in order to keep the shelf straight
and prevent tilting.
2- Installation of the right rail:
- Position your rail at the desired height
- Firstly, insert the biased stem into the
hole at the back of the appliance (2)
- Then, insert the second stem, at the
same height than the other, into the
hole at the front of the appliance (3)
- Be sure that the rail is level, fixed and
doesn't tilt (4)
3- Installation of the left rail:
- Position your rail at the same height
than the right rail
- Firstly, insert the biased stem into the
hole at the back of the appliance
- Then, insert the second stem, at the
same height than the other, into the
hole at the front of the appliance
- Be sure that the rail is level, fixed and
doesn't tilt
4- Installation of the shelf on the rail:
- Pull both rails sliding them outwards
the wine cellar (5)
- Position the shelf in such a way that
the 4 stems facing upwards are inside
the holes provided for that purpose on
the shelf
- You can place yourself under the shelf
in order to have a better view and to
know exactly where holes are (6)
- Rails are slightly movable in order to
block and well maintain the shelf on its
sliding support
-
-
(2)
(4)
(5)
Right rail
Left rail
(1) Biased stem
(3)
Sliding shelf
(6)
71