MAAX BOSCA 6030 Guia De Instalacion página 18

10
Glass shelf installation (cont'd)
STEP
Clean the top rubber part of the brackets with a damp
cloth, then place the glass shelf (5) over the brackets (6).

If you can read the MAAX logo, the
Quick tip shelf is installed on the right side.
Insert the washers (8) in the shelf support cap (9). Align
and insert the shelf support caps (9) with the holes of
the glass and the holes of the shelf brackets (6). Screw
from the bottom of the shelf with the # 10 x ½'' screws
(10) and tighten by hand with the Allen key (11).
Align oblong holes
Do not overtight the support cap (9)
10.2
Check me!
6
10.3
Check me!
9
6
7
10
11
18
5
6
8