Installing The Bathtub - MAAX BOSCA 6030 Guia De Instalacion

Cut out an approximate 6" x 6" opening around
the drain center outlined by measurements C and
D. See image to the right and the chart above. We
recommend that a plumber completes the drain pipe
connection.
2 2

Installing the bathtub

STEP
Remove clear plastic film on the bathtub. Use
cardboard on the bathtub floor as protection until
the installation is complete.
Install the bathtub (13) pushing it completely against
the back studs. Center the bathtub left to right inside
the alcove leaving equal spacing on both sides.
Centering the bathtub left to right is
critical for side wall installation.
Connect plumbing (drain, overflow, faucets, etc.) ac-
cording to local standards and to general rules in the
bathtub installation guide. Make sure that all joints are
waterproof.
Verify that the bathtub is completely level on all sides.
Confirm that the drain pipe is centered.
We recommend that a plumber completes the drain
pipe connection.
Check me!
Check me!
Check me!
Check me!
Leveling the bathtub is
critical for wall alignment
1.3
2.1
Studs
2.2
2.3
7
6"
C
6"
D
Top view
Flush
13
13