UFESA BC1600 Manual De Instrucciones página 20

BUTTONS – SYMBOL LABELS
Function buttons
● On/Off
● Scale reset – tare
● Change of scale unit during weighing.
● Clear product code
● Clear memory
● Add nutritional value for the current
product in the memory. The appliance
can store 99 values
● Check the total nutritional value of
all stored products
Numerical buttons
● Enter product code
WORK MODE
Weighing
Display the product nutritional value
Storing nutritional values
Display the total nutritional value of all stored products
Clear the total nutritional value of all stored products
Operating and using the scale
BEFORE FIRST USE
1
Unpack the scale.
2
Insert the right type of batteries into the battery
compartment (6) (see "REPLACING BATTERIES").
INSTRUCTIONS FOR USE
1
Place the scale on a hard, flat surface. Do not use
the appliance on a carpet, or on flexible surfaces.
Do not put anything on the weighing
plate before turning on the scales.
2
Press the
appliance on.
3
Wait for the display to show the " " value.
When you turn on the appliance, the WT
symbol is shown in the lower left corner
of the display indicating that weighing
mode is enabled.
4
Select a desired weight unit (see "SELECTING
WEIGHT UNIT").
5
Place the product in the centre of the weighing plate.
6
The display shows the weight of the product in the
selected measurement unit.
7
Remove the weighted product from the weighing
plate.
8
When done press and hold the
for 2 seconds to turn off the scales.
, button to turn the
button