Warning Indicators - UFESA BC1600 Manual De Instrucciones

2
Enter a 3-digit product code from the numerical
keyboard.
3
Press , to change the entered product code.
Then enter a new value.
SELECTING WEIGHT UNITS
The appliance is equipped with a weight unit selection
function.
The weight unit may be changed when the " ", value is
shown on the display, as well as after the weighing is done.
In order to change the unit press the
continuously until the desired unit is displayed.
SCALE RESETTING – TARE
The tare function is used for weighing more than one
product without taking them off the scale.
1
Place the first product on the scale, and read the
weighed value.
2
Then press the
3
Place the next product on the scale, and read the
value.
This operation may be repeated.
The tare function may also be used to
weigh products in a container.
4
The display will show a negative value when you
remove product from the weighing plate.
Press to clear the value.
button
, button to reset the value.
AUTOMATIC SHUTDOWN (BATTERY SAVING
MODE)
The appliance turns off automatically if you don't use it
for about 1 minute.
However, we advise to turn off the scale
after your work is done in order to
maximize the battery life time.
REPLACE BATTERY
The battery compartment (6) is situated on the bottom
of the scale. Before first use open the compartment
and insert new batteries.
1
In order to insert new batteries or replace old ones,
open the cover of the battery compartment (6), and
remove the used batteries.
2
Insert three AAA 1.5 V batteries to replace the used
ones. Make sure the batteries are inserted with a right
polarity.
3
Close the cover of the battery compartment (6).

WARNING INDICATORS

Low battery indicator – the display shows the "
symbol. Replace the battery (see "REPLACE BATTERY").
Overload indicator – the display shows the "
Remove the weighed product to prevent damaging the
scale.
Remember not to exceed the maximum
permissible weight of the appliance
which amounts to 5000 g (5 kg).
"
".