JVC DT-R24L41D Manual De Instrucciones página 21

<Functions controlled by the MAKE/TRIGGER system>
Display
TALLY SEL Selects the color of the tally lamp.
SDI 1 Changes the input to "SDI 1."
SDI 2 Changes the input to "SDI 2."
DVI Changes the input to "DVI."
VIDEO 1 Changes the input to "VIDEO 1."
DT-R24L41D
VIDEO 2 Changes the input to "VIDEO 2."
DT-R17L4D VIDEO Changes the input to "VIDEO."
A.MARKER The area marker indication
S.MARKER The safety marker indication
FRAME Indication of the area of the specifi ed aspect ratio
C.MARKER The center marker indication
MARK.SEL Selects the items of "MARKER"*
M.ASPECT Changes the aspect ratio.
1:1 Displays in 1:1 mode.
STATUS Status display*
L.METER Audio level meter display
TIME CODE Time code display
SOURCE ID ☞ "SOURCE ID" in "INFORMATION" on page 17
COLOR OFF Color off
SCR CHECK Screens check
I/P MODE Change a mode according to a input picture.
MUTING Muting on/off
DIMMER Change the intensity of the button lamps.
– – – No function
Selects which functions in "MARKER" are activated, non-"R-" items or "R-" items (☞ "MARKER" on page 13 to 14).
*3
Displays the information shown when INPUT SELECT button of the current input is pressed (☞ "On the Status Display" on page 11). While
*4
controlling with the MAKE system, the information is displayed only at the moment of short-circuiting.
While controlling with the MAKE system, the level meter is switched between displayed (short-circuiting) and hidden (opening). When "LEVEL
*5
METER ch" is set to "OFF," the level meter is not displayed ("NO EFFECT" appears).
While controlling with the TRIGGER system, the pattern of the audio channel display is switched.
While controlling with the MAKE system, the available set-up options will be the setting value currently selected in "SOURCE ID" ("ON" or
*6
"AUTO" [short-circuiting]) and "OFF" (opening). While controlling with the TRIGGER system, uses the same set-up option as those in the
SET-UP MENU (☞ "SOURCE ID" in "INFORMATION" on page 17).
While controlling with the MAKE system, the screen is switched between normal screen (opening) and blue screen (short-circuiting). While
*7
controlling with the TRIGGER system, the screen changes in the same way as when pressing SCREENS CHECK button (☞ q on page 10).
Must be controlled with the TRIGGER system. The mode changes in the order of "NORMAL"
*8
be controlled with the MAKE system.)
• You cannot assign the same function to different pin terminals.
• The TRIGGER system switches each function by short-circuiting the pin terminal for about 1 second and opening it.
Functions to be controlled
3
4
Opening Short-circuiting
Green
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Off
Off
Off
Off
Non-"R-" items
4:3
Off
☞ "On the Status Display" on page 11
*
5
Off
*
6
Color Monochrome
*
7
*
8
Off
NORMAL
—
"CINEMA" "FIELD." (This function cannot
EN
Red
Valid
Valid
Valid
Valid
Valid
Valid
On
On
On
On
"R-" items
16:9
On
On
On
DARK
—
19