Tz Cut Function - Brother P-Touch 2600 Guía De Usuario

The TZ Cut function allows you to set whether or not the machine will automatically cut each
TZ label after it is printed. Turn on the TZ Cut function before starting to print in order to cut
the labels automatically after printing them.
TZ-Tape

After printing a label on TZ tape with the TZ Cut function set to OFF, hold down c
and press r once to feed the tape, then cut it.
AV-Label

AV labels are always cut off after each one is printed regardless of the current TZ cut set-
ting. However, when printing multiple copies of AV labels with the Numbering func-
tion, Repeat printing function or Memory print function, you can choose whether to cut
off each label after it is printed or cut off the string of labels only after they have all been
printed.
To turn the TZ Cut function on or off:
1 While holding down c, press Z once, and keep c held down to display the cur-
rent TZ cut setting.
2 While still holding down c, continue pressing Z until the desired TZ cut setting is
displayed.
3 Release c to apply the selected TZ cut setting.
EXAMPLE
To turn the TZ Cut function on:
1
While holding down
c
keep
2
While still holding down
Z
until ON is displayed.
c.
3
Release

TZ CUT FUNCTION

c
, press
held down.
c
, continue pressing
Z
once, and
T Z C U T
O F F
T Z C U T
O N
99