Brother P-Touch 2600 Guía De Usuario página 36

With Mac OS X 10.1 to 10.2.1:
1 With the P-touch 2600/2610 and the Macintosh turned off, connect the P-touch to the
computer using the enclosed USB interface cable as described on page 6. Be sure to
leave the P-touch turned off.
2 Turn on the Macintosh.
3 Insert the enclosed CD-ROM into the com-
puter's CD-ROM drive.
4 Double-click the Mac OS X folder to open
it.
5 Double-click the P-touch Quick Editor
folder to open it.
6 Double-click the Quick Editor Installer
icon in the folder that appears. The
installer starts up, and then the Introduc-
tion dialog box appears.
29