Modifiers - Maytag EPIC MHP1000SQ Manual De Uso Y Cuidado

Extra Rinse
An extra rinse can be used to ensure the removal of detergent or bleach residue from
garments. This option provides an additional rinse with the same water temperature as the first
rinse.
Rinse Hold
Use this option to help avoid wrinkling of your laundry when a load cannot be removed from
the washer immediately. The wash cycle is paused before the final drain and spin phase so
that the laundry stays in the rinse water until the cycle is continued. This provides optimal
wrinkle care of your wet laundry. The door stays locked during the Rinse Hold cycle and the
indicator light is flashing. Press RINSE HOLD to finish the cycle and unload the washer.
Preset cycle settings of Soil Level (cycle time), Water Temperature, and Spin Speed can be
changed. You can change a modifier after starting a cycle anytime before the selected
modifier begins. Not all modifiers are available with all cycles and options.
To change the water temperature, select the WATER TEMP button until the desired setting
glows.
To change the spin speed, select the SPIN SPEED button until the desired setting glows.
To change the loudness of the Cycle End Signal, select (ADJUSTABLE) CYCLE END
SIGNAL.
To change cycle time, select SOIL LEVEL button.

Modifiers

Wash/Rinse Temp
Select a water temperature based on the type of load you are washing. Use the warmest wash
water safe for fabrics. Follow garment label instructions.
Warm rinses leave the loads dryer than cold rinses. Warm rinses increase wrinkling. In cold
climates, a warm rinse makes the load more comfortable to handle. Cold rinses save energy.
Temperature Guide
Wash Water Temperature
SUPER HOT
HOT
WARM
COLD
In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. Soils
may be difficult to remove.
Automatic Temperature Control
The automatic temperature control electronically senses and maintains a uniform water
temperature. Automatic temperature control regulates incoming hot and cold water.
Automatic temperature control is automatically turned On when a cycle is selected. See
"Preset Cycle Settings" in "Cycles."
Automatic temperature control works for all wash and rinse temperature settings.
Suggested Fabrics
Sturdy colorfast fabrics
Heavy soils
Sturdy colorfast fabrics
Whites and pastels
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed or fade
Light soils
19