Assistance Or Service; In The U.s.a; In Canada - Maytag EPIC MHP1000SQ Manual De Uso Y Cuidado

Cycle too long
Did you choose the Sanitary cycle?
The heater will be activated to provide maximum cleaning performance. Additional time
will be added to the regular cycle to heat the water. This additional time will depend on
the load size and the hot water inlet temperature.
Is "SUD" shown in the display?
Excessive sudsing has been detected and a suds routine has been started to destroy
excessive suds. This routine will add time to the original cycle.
Did you wash a large load using the Quick Wash cycle?
The Quick Wash Cycle is designed for smaller load sizes (2-3 items of lightly soiled
garments). If larger loads are washed using this cycle, wash time will be increased.
Before calling for assistance or service, please check "Troubleshooting." It may save you the
cost of a service call. If you still need help, follow the instructions below.
When calling, please know the purchase date and the complete model and serial number of
your appliance. This information will help us to better respond to your request.
If you need replacement parts
If you need to order replacement parts, we recommend that you use only factory specified
parts. Factory specified parts will fit right and work right because they are made with the same
precision used to build every new Maytag
To locate factory specified parts in your area, call the Maytag Services, LLC Customer
Assistance telephone number or your nearest designated service center.

In the U.S.A.

Call the Maytag Services, LLC Customer Assistance toll free:
1-800-688-9900.
Our consultants provide assistance with:
Features and specifications on our full line of appliances.
Installation information.
Use and maintenance procedures.
Accessory and repair parts sales.
Specialized customer assistance (Spanish speaking, hearing impaired, limited vision,
etc.).
Referrals to local dealers, repair parts distributors and service companies. Maytag
appliances designated service technicians are trained to fulfill the product warranty and
provide after-warranty service, anywhere in the United States.
To locate the Maytag ® appliances designated service company in your area, you can also
look in your telephone directory Yellow Pages.

ASSISTANCE OR SERVICE

® appliance.
Did you wash a large load using a gentle cycle?
When using the Delicate, Handwash, Silk and Wool cycles you should use small loads.
This ensures a gentle wash for your garments without increasing cycle times.
Did the load cause imbalance?
When too much imbalance occurs, an imbalance routine will start to redistribute the
load. During the imbalance routine, the time displayed may pause until this activity is
complete, then resume with the remainder of the cycle.
Door locked at end of wash cycle
Did all of the water drain out of the washer during the spin?
Select DRAIN/SPIN to remove any water remaining in the washer. The washer door will
unlock at the end of the drain.
For further assistance
If you need further assistance, you can write to Maytag
concerns at:
Maytag Services, LLC
ATTN: CAIR ® Center
P.O. Box 2370
Cleveland, TN 37320-2370
Please include a daytime phone number in your correspondence.
Call the Whirlpool Canada LP Customer Interaction Centre toll free: 1-800-807-6777.
Our consultants provide assistance with:
Features and specifications on our full line of appliances.
Use and maintenance procedures.
Accessory and repair parts sales.
Referrals to local dealers, repair parts distributors, and service companies. Whirlpool
Canada LP designated service technicians are trained to fulfill the product warranty and
provide after-warranty service, anywhere in Canada.
For further assistance
If you need further assistance, you can write to Whirlpool Canada LP with any questions or
concerns at:
Customer Interaction Centre
®
Whirlpool Canada LP
1901 Minnesota Court
Mississauga, Ontario L5N 3A7
Please include a daytime phone number in your correspondence.
® appliances with any questions or

In Canada

25