Options - Maytag EPIC MHP1000SQ Manual De Uso Y Cuidado

Lavadora automática de carga frontal
Ocultar thumbs Ver también para EPIC MHP1000SQ:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Parts supplied:
A
D
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washers (4)
D. Transport bolt hole plug (4)
E. Beaded strap
Alternate Parts
Your installation may require additional parts. If you are interested in purchasing one of the
items listed here, call the toll-free number on the cover or in the "Assistance or Service"
section.
If You Have
You Will Need to Buy
Laundry tub or standpipe
Sump pump system (if not already available)
taller than 96" (2.4 m)
Overhead sewer
Standard 20 gal. (76 L), 30" (76.2 cm) tall drain tub or
utility sink and sump pump (available from local plumbing
suppliers)
Floor drain
Siphon break, Part Number 285834; additional drain hose
Part Number 8318155; and connector kit, Part
Number 285835
Drain hose too short
4 ft (1.2 m) drain hose extension kit, Part Number 285863
Water faucets beyond reach
2 longer water fill hoses:
of fill hoses
6 ft (1.8 m) Part Number 76314,
10 ft (3.0 m) Part Number 350008
B
C
E
Pedestal
A pedestal will add to the total height of the washer for a total height of 53.5" (135.9 cm).
This pedestal is available in several colors.
To order, call the dealer from whom you purchased your washer or refer to the "Assistance or
Service" section.
Pedestal
Color
Height
10" (25.4 cm)
White
10" (25.4 cm)
Black
15.5" (39.4 cm)
White
15.5" (39.4 cm)
Black
15.5" (39.4 cm)
Blue
Stack Kit
Are you planning to stack your Maytag washer and dryer? To do so you will need to purchase
a Stack Kit.
To order, call the dealer from whom you purchased your dryer or refer to the "Assistance or
Service" section. Ask for Part Number 8212640.

Options

Optional pedestal
Part Number
MHP1000SQ
MHP1000SB
MHP1500SQ
MHP1500SB
MHP1500SK
5

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido