9 -Replace the dipstick (B).
10-Close the door (A) when the operation has been completed.
11-Turn the unit on and allow it to warm up for a few minutes.
12-Turn the unit off and check the oil level (See "Do not mix oils with different characteristics
or from different manufacturers.").
Important
Do not discard used oil, but hand it over to an authorised disposal organisation in
compliance with current local laws.
Use oils and lubricants of the types recommended by the manufacturer.
CHANGING THE FUEL FILTER
Proceed as indicated.
1 -Switch the appliance off and leave it to cool.
2 -Open the door (A).
3 -Provide a container to catch any leaks.
4 -Loosen the hose clamps (E).
5 -Remove the filter (F) and replace it.
6 -Tighten clamp (E).
7 -Close the door (A) when the operation has been completed.
Important
Do not discard pollutants into the environment. They must be disposed of according
to current laws.
(A)
Door
Clamp
- 37 -
Use, maintenance and installation instructions
TEC 30D EV
(E)
Clamp
(F)
Fuel filter
(E)
IDM-40200800700.pdf
GB