Pausing During Inhalation; Display Indicators During Inhalation - Pari Lamira Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 87

Pausing during inhalation

The inhalation session can be interrupted
briefly if necessary by using the Pause
function:
• Press the ON/OFF button for approx.
1 second.
Pause mode is activated when the LED
flashes green.
• Press the ON/OFF button for approx.
1 second again to resume the inhalation
session.
Info:
The Pause function can only be
activated after an operating time of
a few seconds.
In the case of longer pauses, switch the
controller off by pressing the ON/OFF but-
ton for at least 2 seconds.
Provided there is enough liquid in the
medication reservoir, nebulisation can be
restarted by pressing the ON/OFF button.
®
Lamira
- 2020-08
Display indicators during
inhalation
The following indicators appear on the
display during inhalation:
Start
During
inhalation
Nebulising with battery power
Nebulising with mains power
Pause
function
activated
Pause function during battery
operation
Pause function during
operation with mains power
en
41

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido