Mettler Toledo IND560 Guia De Instalacion página 4

NOTE ON FIRMWARE VERSIONS
This manual describes features and functions of the IND560 terminal with
version 4.xx firmware. Terminals with version 3.xx firmware or lower will differ
in some areas. The following list indicates the key differences between versions:
New in version 4.xx – optional USB host port; install, backup and restore
software via USB; calibration test reports.
New in version 3.xx –operation as a Remote Display, Drive-560 Application
Software, DYN-560 Application Software, EtherNet / IP PLC interface, repeat
print function, PLC messaging, analog section saturation test and warning,
supports selection of Tare or Target Table record via PC or PLC, Scale
branch accessibility (view only) when Approved, added a Reset Transaction
Counter softkey to home screen, updated MinWeigh™ formula, and added
various new Shared Data variables.
Version 3.01 firmware is specifically required for operation of the Modbus-
TCP interface
Statement regarding harmful substances
We do not make direct use of harmful materials such as asbestos, radioactive
substances or arsenic compounds. However, we purchase components from
third party suppliers, which may contain some of these substances in very small
quantities.