IND560 Installation Manual
Whether communicating weight data to a process PLC or providing an easier way
to do terminal configuration via the InSite™ PC Tool, the IND560 offers multiple
connectivity options to improve applications.
Direct PLC connectivity is available using 4-20mA Analog Output, Allen-Bradley
RIO, PROFIBUS DP, DeviceNet, EtherNet/IP or Modbus TCP protocols. Interfaces are
also available for serial data via RS-232/422/485 and Ethernet TCP/IP networking.
With the release of v4.00 firmware, a new optional USB interface provides the
ability to connect a QWERTY keyboard for operator input. The new USB option can
also be used for upgrading terminal firmware and performing a save/restore.
For information about IND560 terminal operation, refer to the IND560 User Guide.
IND560 Overview
The IND560 terminal is available in the following versions:
•
Harsh enclosure with analog load cell connection
•
Harsh enclosure with high-precision (IDNet) base connection
•
Panel-mount enclosure with analog load cell connection
•
Panel-mount enclosure with high-precision (IDNet) base connection
Standard IND560 Features
•
•
•
•
•
•
•
•
•
1-2
Basic weighing terminal used in safe areas
Panel-mount or harsh desk/wall-mount enclosures
Connect one analog load cell scale base (or up to eight 350 ohm load
cells) or an IDNet base depending upon the version of the IND560
Operation as a Remote Display for another terminal
128 × 64 dot-matrix graphic vacuum fluorescent display (VFD) with
21mm-high weight display
Real-time clock (battery backup)
One serial port for asynchronous, bidirectional communication and print
output
85–264 VAC power input range
Support for the following option boards:
Analog Output interface
Ethernet TCP/IP with dual serial ports
USB host with Ethernet TCP/IP and single serial port
®
Allen Bradley RIO
interface
DeviceNet™ interface
®
PROFIBUS
DP interface
EtherNet/IP interface