Specifications; Recommended Batteries; Handset Operating Times/Charging Times; General Specifications - Gigaset C34 Manual De Instrucciones

Excerpt from the original declaration:
"We, Siemens AG, declare, that the above men-
tioned product is manufactured according to
our Full Quality Assurance System certified by
CETECOM ICT Services GmbH in compliance
with ANNEX V of the R&TTE-Directive 99/5/EC.
The presumption of conformity with the essen-
tial requirements regarding Council Directive
99/5/EC is ensured."
Senior Approvals Manager"
The Declaration of Conformity (DoC) has been
signed. In case of need, a copy of the original
DoC can be made available via the company
hotline.

Specifications

Recommended batteries

(Valid at the time of going to press)
Nickel-metal-hydride (NiMH):
u
Sanyo Twicell 700
u
Sanyo Twicell 650
u
Sanyo NiMH 800
u
Panasonic 700 mAh "for DECT"
u
GP 700mAh
u
GP 850mAh
u
Yuasa Technology AAA Phone 700
u
Yuasa Technology AAA 800
u
VARTA Phone Power AAA 700 mAh
The handset is supplied with two recom-
mended batteries.
Handset operating times/charging
times
Capacity 700 mAh
Standby time approx. 150 hours (6 days)
Calling time approx. 10 hours
Charging time approx. 6 hours
The operating and charging times apply
only when using the recommended bat-
teries.

General specifications

Dimensions, 158 x 59 x 32 mm
handset
(L × W × H)
Weight of handset 128 g
with battery

Guarantee Certificate Ireland

u
Without prejudice to any claim the user
(customer) may have in relation to the
dealer or retailer, the customer shall be
granted a manufacturer's Guarantee
under the conditions set out below:
u
In the case of new devices and their
components exhibiting defects result-
ing from manufacturing and/or mate-
rial faults within 24 months of pur-
chase, Siemens shall, at its own option
and free of charge, either replace the
device with another device reflecting
the current state of the art, or repair the
said device. In respect of parts subject
to wear and tear (including but not lim-
ited to, batteries, keypads, casing), this
warranty shall be valid for six months
from the date of purchase.
u
This Guarantee shall be invalid if the
device defect is attributable to
improper care or use and/or failure to
comply with information contained in
the user manuals. In particular claims
under the Guarantee cannot be made
if:
– The device is opened (this is classed
as third party intervention)
– Repairs or other work is done by per-
sons not authorised by Siemens
– Components on the printed circuit
board are manipulated
– The software is manipulated
– Defects or damage caused by drop-
ping, breaking, lightning or ingress
of moisture. This also applies if
defects or damage was caused by
mechanical, chemical, radio inter-
Appendix
17