Warnings - Nice RUN1800 Instrucciones Y Advertencias Para La Instalación Y El Uso

1) Warnings

This manual contains important information regarding safety. Before
starting installation of the components, it is important that you read all
the information contained herein. Store this manual safely for future use.
Due to the dangers which may arise during both the installation and use
of the RUN, installation must be carried out in full observance of the
laws, provisions and rules currently in force to ensure maximum safety.
This chapter provides details of general warnings. Other more specific
warnings are detailed in Chapters "3.1 Preliminary Checks" and "5 Test-
ing and Commissioning".
!
According to the most recent European legislation, the auto-
mation of doors or gates is governed by the provisions listed in
Directive 98/37/CE (Machine Directive) and, more specifically the
standards: EN 13241-1 (harmonised standard); EN 12445; EN
12453 and EN 12635, which enables the declaration of machine
conformity to the machine directive.
Visit "www.niceforyou.com" for further information and guidelines for
risk analysis and how to draw up the Technical Documentation. This
manual has been especially written for use by qualified fitters. Except for
the enclosed specification "Instructions and Warnings for Users of the
RUN gearmotor" to be removed by the installer, none of the information
provided in this manual can be considered as being of interest to the
end users!
• Any use or operation of RUN not explicitly provided for in these instruc-
tions is not permitted. Improper use may cause damage and personal
injury.
• A risk analysis must be carried out before starting installation, includ-
ing a the list of essential safety requisites provided for in Enclosure I
of the Machine Directive, indicating the relative solutions employed.
N.B. Risk analysis is one of the documents included in the "Technical
Documentation" for this automation.
• Check whether additional devices are needed to complete the auto-
mation with RUN based on the specific application requirements and
dangers present. The following risks must be considered: impact,
crushing, shearing, dragging, etc. as well as other general dangers.
• Do not modify any components unless such action is specified in this
manual. Operations of this type are likely to lead to malfunctions. NICE
disclaims any liability for damage resulting from modified products.
• During installation and use, ensure that solid objects or liquids do not
penetrate the control unit or other open devices. If necessary, contact
the NICE customer service department; use of RUN in these condi-
tions can be dangerous.
• The automation system must not be used until it has been commis-
sioned as described in chapter 5 "Testing and commissioning".
• The RUN packaging materials must be disposed of in compliance with
local regulations.
• If a fault occurs that cannot be solved using the information provided
in this manual, contact the NICE customer service department.
• In the event that any automatic switches are tripped or fuses blown,
attempt to identify and eliminate the relative fault.
• Disconnect all the power supply circuits before accessing the termin-
als inside the RUN cover. If the disconnection device is not identifi-
able, affix the following sign: "WARNING: MAINTENANCE WORK IN
PROGRESS".
Special warnings concerning the suitable use of this product in relation
to the 98/37CE "Machine Directive" (ex 89/392/CEE):
• This product is issued on the market as a "machine component" and
is therefore manufactured to be integrated in a machine or assembled
with other machines in order to create "a machine", in accordance with
the directive 98/37/EC, exclusively in combination with other compo-
nents and in the manner described in the present instructions manual.
As specified in the directive 98/37CE the use of this product is not
admitted until the manufacturer of the machine on which this product
is mounted has identified and declared it as conforming to the directive
98/37/CE.
Special warnings concerning suitable use of this product in relation to
the 73/23/EEC "Low Voltage" Directive and subsequent amendments
93/68/CEE:
• This product complies with the provisions envisaged by the "Low Vol-
tage" Directive if used in the configurations foreseen in this instruction
manual and in combination with the articles present in the Nice S.p.a.
product catalogue. If the product is not used in the specified configu-
rations or is used with other products that have not been foreseen, the
requirements may not be guaranteed; use of the product is prohibited
in these conditions until compliance with the requirements foreseen by
the directive has been verified by installers.
Special warnings concerning suitable use of this product in relation to
the 89/336/EEC "Electromagnetic Compatibility" Directive and subse-
quent amendments 92/31/EEC and 93/68/EEC:
• This product has undergone tests regarding electromagnetic com-
patibility in the most critical of use conditions, in the configurations
foreseen in this instruction manual and in combination with articles
present in the Nice S.p.A. product catalogue. Electromagnetic com-
patibility may not be guaranteed if used in configurations or with other
products that have not been foreseen; use of the product is prohibited
in these conditions until compliance with the requirements foreseen by
the directive has been verified by installers.
3 3