Push-Buttons (B2, B3) - Kollmorgen PCMM Manual Del Usuario

1.6.3 Push-buttons (B2, B3)

The push-buttons can be used to start predefined functions.
Function
Boot-time functions (press and hold button during power-on boot sequence)
Recovery
Mode
Menu
Operational functions (press button during normal operation mode)
Menu
Select Menu
Item
Confirm
Push-button Remarks
B2 Press and hold to boot into recovery mode.
B3 Press and hold to block the application auto-start and to start
cycling through the menu items.
B3 Press to cycle through the menu items. The menu items will dis-
played on the 7-segment LED repeatedly for 10 s and can be
selected py pressing B2.
B2 Press while the required menu item is displayed to perform
action.
Application is running, available menu items:
'IP' address
'stop' application (confirm)
No application is running, available menu items:
'IP' address
'start' application (confirm)
'reset' to defaults (confirm)
'backup' to SD card (confirm)
'restore' from SD card (confirm)
B2 If the selected menu item selection requires a confirmation, "y"
is displayed for 10 s - press B2 to confirm.
PCMM Installation Manual | 1 English
Kollmorgen | kdn.kollmorgen.com | July 2019 15