Baby auto G-CAT 123 Manual De Uso página 33

6. REMOVING THE 5-POINT HARNESS
1. Loosen the 5-point harness of the child seat as much as possible
(fig.29).
Back side of the child seat:
2. Press the button of the shoulder belt height adjuster
the seat shell and tilt the shoulder belt height adjuster
(fig.30).
3. Move the shoulder belt height adjuster
fix the position by releasing the button of the shoulder belt height
adjuster.
4. Loosen the 5-point harness of the child seat as much as possible.
Unhook the shoulder belts
the connecting piece (fig.31) .
5. Snap the connecting piece in the provided storage (fig.32).
6. Slide the belt loops off of the plastic extensions of the shoulder belt
height adjuster
Front side of the child seat:
7. Pull below both, the shoulder pads
to the front through the slots (front side of the child seat) (fig.34).
8. Open the harness buckle
9. Open the left and right velcro on the lower part of the cover and lift
the cover piece to the front. Slide the buckle latches down into the
storage compartments (fig.36,37).
10. Roll the shoulder belts
storage compartments (fig.37).
11. Repositon the two cover parts to the rear and lock the velcro on the
left and right side of the cover back side (fig.38).
12. Lift the recline handle and pull at the front to fully recline the child
seat (fig.39).
13. Grasp the metal plate from underneath and turn it into a vertical
position.
14. Push upwards and slide the metal plate through the slot . Remove the
harness buckle (fig.40).
on the back side of the child seat from
(D)
(fig.33).
(J)
(press the red release button) (fig.35)
(E)
together and place them also into the
(D)
into the top position and
(J)
and the two shoulder belts
(C)
at the rear of
(J)
towards you
(J)
(D)
33