Care And Maintenance; Care For The Harness Buckle - Baby auto G-CAT 123 Manual De Uso

8. CARE AND MAINTENANCE

8.1 Care for the harness buckle

It is vital for the safety of your child that the harness buckle works
correctly Malfunctions of the harness buckle are usually caused by
accumulations of dirt or foreign bodies.
Malfunctions are as follows:
• The buckle latches are ejected only slowly when the red release
button is pressed.
• The buckle latches will no longer lock home (i.e. they are ejected
again if you try to push them in).
• The buckle latches engage without an audible „click".
• The buckle latches are difficult to insert (you feel resistance).
• The buckle only opens if extreme force is applied.
Remedy
Wash out the harness buckle so that it functions properly once
again:Cleaning the harness buckle.
1. Follow section 6 to Remove the harness buckle
2. Soak the harness buckle
at least an hour. Then rinse and dry it thoroughly.
8.2 Cleaning
• The cover can be removed and washed. Please observe the
instructions on the washing label of the cover.
Removing the cover
A) Headrest
1. Move the headrest of the child seat to the upper position (fig. 57).
2. Take the elastic seam of the cover from the hooks at the back side of
the headrest (fig. 58) and remove the cover of the headrest.
B) Cover
1. Undo the hooks on the bottom side (fig. 59).
2. Remove the cover (fig. 60).
Re-fitting Simply follow the steps in the opposite order.
in warm water with washing-up liquid for
(E)
(fig.53,54,55)
(E)
35