Removal Of The Child Seat - Baby auto G-CAT 123 Manual De Uso

4.4.1 Securing your child using the car seat belt. Group 2/3
1. Pull out the vehicle seat belt and guide it in front of your child to
the vehicle seat buckle. Engage the buckle tongue in the vehicle seat
buckle CLICK! (fig.25/B)
CAUTION! Do not twist the belt.
2. Place the diagonal seat belt section and lap belt section on the side
of the vehicle seat belt buckle under the armrest and into the red
beltguide
(N)
3. Place the lap belt section on the other side of the child seat in the red
belt guide
(N)
4. Guide the diagonal seat belt section into the red belt holder
headrest
(A)
twisted (fig.28).
5. Make sure that the diagonal seat belt section runs over your child's
shoulder bone, and not in front of his or her neck.
TIP! You can still adjust the height of the headrest
vehicle.
For the safety of your child, before every journey in the car check that...
• the lap belt section runs through the light red belt guides
the seat cushion
• the diagonal seat belt section on the side of the vehicle seat belt buckle also runs
through the light red belt guide
• the diagonal seat belt section runs through the dark red belt holder
headrest.

5. REMOVAL OF THE CHILD SEAT

1. To release the ISOFIX fastening, squeeze the safety button (M) ,first
on one side, then on the other.
2. Open the buckle of the vehicle seat belt and pull out the diagonal
from lock-off.
3. To release the Top Tether anchoring, loosen the belt by pressing the
brake button of the adjuster. Then take the snap hook out of the
anchoring point.
4. Push the ISOFIX locking arms back into the seat shell.
32
of the child seat (fig.26).
(fig.27).
until it lies completely in the belt holder
(N)
(A)
of the seat cushion.
of the
(B)
and is not
(B)
again here in the
(N) on both sides of
(B) of the