Memory Functions; Recalling Measurements In Memory - smartheart 01-509 Manual De Instrucciones

MEMORY FUNCTIONS

Recalling Measurements in Memory

1. When the monitor is off, press and
release the MEMORY button to access
the memory bank.
Select U1/SET or U2 to review the
2.
respective readings in memory.
3. The unit will first display the average
of the last three measurements, Fig
1. If there are less than 3 readings in
memory, the most recent reading will
display.
Press the MEMORY
4.
begin scrolling through the saved
measurements. Measurements will
appear on the display from most current
to oldest; the memory number alternate
in the same position as the date/time
stamp.
5. All results for a given measurement will
display, including measurement results,
pulse rate, Hypertension Indicator and
Irregular Heartbeat alert (if applicable).
The date/time stamp of the measurement
will alternate as well, Fig 2.
6. When the number of readings exceeds
250, the oldest data will be replaced
with the new record.
18 • ENGLISH
button again to
MEMORY
Recall Button
Fig. 1
1 2
U1/SET U2
Button Button
Fig. 2