Memory Functions - smartheart 01-560 Manual De Instrucciones

MEMORY FUNCTIONS

Recalling Measurements in Memory
This monitor stores and recalls up to 60 measurements,
plus an average of the last three measurements in
memory. These measurements can be shared with your
physician or trained healthcare professional.
1. Press the M1 or M2 button.
2. The first reading displayed is the average of the last
three measurements. AVG will appear on the lower
right of the screen, Fig 1.
3. Continue to press the M1 or M2 button to
successively view the next previously stored
measurements. The measurement number (01-60)
will appear on the lower left portion of the display,
Fig 2.
4. Each memory bank stores up to 60 readings; when
the number of readings exceeds 60, the oldest data
will be replaced with the newest record.
Clearing Measurements from Memory
With the unit turned off, press and hold the M1 button
or the M2 button until 'CLR' appears on the display, Fig
3. Each memory bank must be cleared separately.
Fig. 1
Fig. 2
Fig. 3
ENGLISH • 17