Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLE SHOOTING
Problem
Display shows an
abnormal result.
Display is blank
when power is on.
No response when
STOP/START is
pressed or when
new batteries have
been loaded.
Possible Cause
Cuff position was not correct
or was not tight enough.
Body posture was not correct
during measurement.
Speaking, excessive
movement, angry, excited
or nervous anxiety during
measurement.
Batteries may be expired or
installed improperly.
Incorrect operation; possible
strong electromagnetic
interference.
Solution
Apply the cuff properly and attempt
a new measurement.
Review the 'Taking a Measurement'
portion of this manual and attempt
a new measurement.
Wait a period of time and attempt
a new measurement after calm has
returned; do not speak or move
during measurement.
Check the polarity of the batteries
and reinstall if necessary; replace
batteries with new batteries.
Remove batteries and wait a
minimum of five minutes; reinstall
batteries and attempt a new
measurement.
ENGLISH • 25
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
