Display Symbols; Troubleshooting - smartheart 01-5025 Manual De Instrucciones

DESCRIPTION OF DISPLAY SYMBOLS
Symbol Meaning
Low battery

TROUBLESHOOTING

Problem
Display shows an
abnormal result or
the result is outside
of typical range
Display shows
Display is blank
when power is on
Possible Cause
Cuff position was not correct or
was not tight enough
Speaking, excessive movement,
angry, excited or nervous anxiety
during measurement
Cuff failed to inflate properly
Improper operation of the device
Pressurization is over 300mmHg
Batteries may be expired or
installed improperly
Symbol Meaning
An error has occurred during inflation
The measurement has failed
Solution
Apply the cuff properly and attempt a
new measurement; consult the applying
your cuff section of this manual for more
information about cuff application
Wait a period of time and attempt a new
measurement after calm has returned; do
not speak or move during measurement
Ensure the air hose is properly connected
to the cuff and monitor
Review the 'Taking a Measurement'
portion of this manual and attempt a new
measurement
Review the 'Taking a Measurement'
portion of this manual and attempt a new
measurement
Check the polarity of the batteries and
reinstall if necessary; replace batteries with
new batteries
ENGLISH • 17