Setting Date/Time - smartheart 01-508 Manual De Instrucciones

SETTING DATE/TIME

IT IS NECESSARY TO SET THE DATE AND TIME FOR THE UNIT
EVERY TIME BATTERIES ARE INITIALLY INSTALLED OR REPLACED.
The date/time feature is on the bottom left of the display screen. This unit
stores the date and time, including year; the clock function may be set for
12 hour or 24 hour (military time) format.
1. When the batteries are first installed, the device will automatically
prompt you to set the Date/Time feature as indicated by the flashing
YEAR on the display.*
2. Press the MEM button to advance the display to the desired year,
press SET to confirm the year.
3. Next, the month will blink on the lower left of the display. Repeat step
2 to set the Month, Date, 12/24 hour preference, Hours, then Minutes.
4. After setting the minutes, the unit will automatically exit out of the
Date/Time setting mode and briefly scroll through the Date/Time
before shutting off.
*NOTE: If the batteries have already been installed—when the unit is off (a
blank display screen), press and release the SET button to turn the unit on,
the press and hold the SET button to begin setting the Date/Time following
the steps above.
ENGLISH • 11