EdilKamin BERING Instalación Uso Y Mantenimiento página 50

Select SEASON and confi rm the setting with the
S E A S O N
S T A G I O N E
C L O C K
O R O L O G I O
P R O G R A M M E R
P R O G R A M M A T O R E
ESC
Select the desired seasonal setting (SUMMER-WINTER) with
the + and - keys:
S E A S O N
S T A G I O N E
I N V E R N O
W I N T E R
ESC
after setting the language, press ESC repeatedly until the
HOME screen appears.
USER MENU
The USER MENU lets you personalise and check certain con-
sole function settings.
For access to the USER MENU, proceed as follows: from the
HOME screen press any key and then the menu key, select
CONSOLE and confi rm the selection with the enter key
C O N S O L E
B O I L E R C A L D A I A
ESC
Select USER MENU descending with the key
selection with the key
C L O C K
O R O L O G I O
P R O G R A M M E R
P R O G R A M M A T O R E
U S E R M E N U
M E N U U T E N T E
ESC
A series of settings will appear, which let to personalise the
contrast, brightness, duration of screen lighting, correct the
temperature detected by the console and check the fi rmware
version.
INSTRUCTIONS FOR USE
key:
=
:
, confi rm the
- 50
Adjusting the contrast
This lets you adjust the contrast of the display.
Depending on the console installation position (recommended
at 1.50 m from the fl oor), it may be necessary to adjust the con-
trast for a clearer display.
Decrease the contrast if the display background is too dark,
increase the contrast if the display text is transparent.
Adjust the contrast with the + and - keys, the minimum contrast
is 120 points, the maximum is 200, the factory setting is 140
D I S P L A Y
C O N T R A S T O
D I S P L A Y
C O N T R A S T = 1 4 0
ESC
Press the key to move to the next setting, press the ESC key
repeatedly to return to the HOME screen.
Stand-by display brightness
Adjustment of display brightness in stand-by mode.
By means of this adjustment, you can set the brightness of the
display when it is not being used.
Change the set value with the + and - keys.
The minimum setting is 0% (no light), the maximum is 100%,
the factory setting is 30%.
" S T A N D - B Y
R E T R O I L L .
S T A N D - B Y
B A C K L I G H T " = 3 0
ESC
Press the key to move to the next setting, press the ESC
key repeatedly to return to the HOME screen.
Display brightness in active mode
Adjustment of the display brightness during use of the console.
Change the set value with the + and - keys.
The minimum setting is 0% (no light), the maximum is 100%,
the factory setting is 80%.
" I N O P E R A T I O N
R E T R O I L L .
A T T I V O
B A C K L I G H T " = 8 0
ESC
-
= 1 4 0
= 3 0
= 8 0