Menu Install - Medion MD 30325 Manual Del Usuario

Menu INSTALL

Under normal circumstances, the automatic channel seek function looks for the available channels
and these are automatically stored on the channel locations in the order they are found. You can
reorder the channel locations in the channel table (see menu "PROGRAM TABLE", page 25).
The INSTALL menu moreover puts you into a position to search for individual channels manually
and to store them as well as to adjust the picture to the optimum setting.
Menu point
Program
Open the channel table (see following section) with
Table
This displays the number of the channel location of the current channel. You
Program
can select another channel location with the directional keys
the digit keys (0 to 99).
Store the new channel location with the OK key or by selecting the Store
option and pressing on
displayed.
Remember that the current channel will be saved onto the selected channel
location. The channel will be stored under the channel number (e.g. "C-
25") and not under the channel name.
It is advisable to reserve channel location 0 if you want to connect a video
recorder.
Band The television frequency band is sub-divided into channel types C (Normal
channel) and S (Special channel). This displays the channel type of the
currently set channel.
This displays the channel number of the currently set channel. You can
Channel
select another channel with
Colour Here you select a country-specific TV colour standard: Auto (the correct
System colour system is set automatically), PAL (for PAL 50 MHz), SECAM ,
PAL 60 . If the video standard (see following option) is set to "I", then
SECAM is not available.
If an external source is selected (EXT - 1, etc.), NTSC 3.58 and
NTSC 4.43 (usual colour format in North America) are also available.
Choosing an incorrect colour system will result in an incorrect picture.
Settings
. The Stored... message will then be
.
.
or with
23
EN