Basic Functions; Turning The Lcd Tv On And Off; After Switching On For The First Time; Automatic Channel Seeking - Medion MD 30325 Manual Del Usuario

Language setting
The menu language of this manual is English. You can, however, set the OSD to
other languages.
B F
ASIC UNCTIONS

Turning the LCD TV on and off

1. Press the on/off switch on the back of the device. The stand-by mode will be activated and a
blue light on the front will come on.
2. You can switch on the device by pressing a digit key on the remote control or a P/CH
channel selection key on the remote control or on the device itself. The light on the front will
go out.
3. You can put the device back into stand-by mode with the stand-by key on the remote control
or with the stand-by key on the right side of the device.
4. Press the on/off switch on the back of the device again to switch the device off completely.

After switching on for the first time

When you switch your LCD-TV on for the first time, the
Auto Programm menu will appear in English.
• If you wish to change the pre-set country setting, set the
required country with the
country setting has an effect on the sequence in which
channels are stored.
• Then select if necessary the Language message with
the directional key
language with the
• If you wish to change the pre-set for the video text
language, use the directional key
message TXT Language (Language for teletext) and
use the directional keys to select the required language region Westen , Ost (East),
Turk/Gre (Turkish/Greek), Kyrillisch or Arabisch (also see "Menu FUNCTION",
page 22).
• Then confirm the message " CHECK ANTENNA CABLE " by pressing the OK key or pressing the
red key.
• You can cancel this process by pressing the blue key.

Automatic channel seeking

Automatic channel seeking will now commence. This
takes a few minutes.
You can cancel this process with the blue key .
The channels are stored in a country-specific sequence in
the channel locations. It is possible to store a maximum of
100 channels.
10
directional key. The
and choose the required
directional keys.
to select the